Shenzhen Huimai Technology Co., Ltd
Specializing in the R & D, production and sales of automation equipment
National hotline：8617818343707
Product classification
Ultrasonic series
Computer desktop cutting machine cold cutting series
Computer integrated cutting machine cold cutting series
Computer large-scale cutting machine cold cutting series
Computer eagerly cutting machine
Computer cold and hot dual-purpose cutting machine
Hot-cutting cold and hot dual-purpose plus punching and cutting machine
Computer eagerly cutting round corner shaped tape cutting machine
Computer eager electronic eye tracking tape cutting machine
Computer eagerly cutting high-speed labeling machine
Desktop heat sealing bag making machine series
Large heat sealing bag making machine series
Ultrasonic non-woven fabric heat sealing bag making machine
PE vest plastic shopping bag heat sealing bag making machine
Automatic shaped rolling machine
Glove machine series
Sealing machine series
Wire Harness Series
Mask machine series
Laser cutting machine series
Paper straw machine series
Automatic packaging machine
Automatic slitting and winding machine
News Center
Contact us
Shenzhen Huimai Technology Co., Ltd
Contacts：Emily Hsu
Phone：8617818343707
Telephone：8617818343707
Address：Building C, youth dream workshop, dalanglangkou, Longhua District, Shenzhen
When operating the pipe bender, you must ensure that the equipment is in the correct grounding state, and must not be connected to a voltage beyond the specified voltage range, and you must not stop plugging or unplugging in a live condition. Generally, this detail will be done well for experienced equipment maintenance engineers, involving maintenance specifications and safe operation methods.
The following points should be avoided when using the pipe bender correctly:
1. Plug and unplug after the device is stopped, and do not blindly touch the wires and cables to avoid pulling off.
2. Don't use hard objects to stop impact on the switch and encoder.
3. Don't hit the monitor with sharp objects.
4. Place the electrical box in the ventilated center to avoid stopping work in an environment with corrosive gas.
5. Keep the equipment clean, especially there should be no debris in the sliding groove of the slider and clamping block.
6. Clean and check the equipment regularly, do a good job of maintaining the pipe bender in time, and cut off the power before operation.
Telephone：8617818343707 EMAIL：2016971905@qq.com
Company address：Building C, youth dream workshop, dalanglangkou, Longhua District, Shenzhen
copyright：Shenzhen Huimai Technology Co., Ltd Yue ICP Bei No. 123456
Scan wechat
telephone