Shenzhen Huimai Technology Co., Ltd Specializing in the R & D, production and sales of automation equipment

National hotline：8617818343707

Product classification

Ultrasonic series

Ultrasonic Spot Welder

Ultrasonic suture machine

Ultrasonic towel machine

Ultrasonic glove machine

Ultrasonic insole machine

Ultrasonic embossing machine

Ultrasonic eye mask machine

Ultrasonic bonding cutting machine

High speed ultrasonic cutting machine

Ultrasonic high-speed label cutting machine

Ordinary ultrasonic cutting machine

Double ultrasonic punching and cutting machine
Computer desktop cutting machine cold cutting series

(Knife width 100mm-1800mm)
Computer integrated cutting machine cold cutting series

(Knife width 400mm-1800mm)
Computer large-scale cutting machine cold cutting series

(Knife width 1000mm-2000mm)
Computer eagerly cutting machine

（刀宽100mm-300mm）
Computer cold and hot dual-purpose cutting machine

（刀宽100mm-300mm）
Hot-cutting cold and hot dual-purpose plus punching and cutting machine
Computer eagerly cutting round corner shaped tape cutting machine
Computer eager electronic eye tracking tape cutting machine
Computer eagerly cutting high-speed labeling machine
Desktop heat sealing bag making machine series

(Knife width 200mm-700mm)
Large heat sealing bag making machine series

(Knife width 800mm-1600mm)
Ultrasonic non-woven fabric heat sealing bag making machine
PE vest plastic shopping bag heat sealing bag making machine
Automatic shaped rolling machine

Effective width of mill 180mm-380mm
Glove machine series

Automatic disposable glove machine

Semi-auto disposable glove machine
Sealing machine series

Gluing and beating machine

Desktop type (raincoat and jacket small tent)

Column type (big tent hovercraft kayak)
Wire Harness Series

Computer wire stripping machine

Automatic terminal machine

Automatic soldering machine

Automatic winding machine

Automatic pay-off machine
Mask machine series

Flat mask machine

KN95 folding mask machine

Cup mask machine
Laser cutting machine series
Paper straw machine series
Automatic packaging machine
Automatic slitting and winding machine

Width 1m-1.8m

News Center

Contact us

Shenzhen Huimai Technology Co., Ltd

Contacts：Emily Hsu

Phone：8617818343707

Telephone：8617818343707

Address：Building C, youth dream workshop, dalanglangkou, Longhua District, Shenzhen

Location： Home page » What's new > Do you know the three common faults of the slicer?

Do you know the three common faults of the slicer?

Release time：2020-09-21Number of visits： 2466

1. What is the working principle of the slicer? What is the difference between the desktop automatic slicer and the floor-standing slicer?

In simple terms, the working principle of the slicing machine is to cut the material into thin slices according to a certain ratio or width through a blade for subsequent use. The main difference between the desktop automatic slicer and the floor-standing type is the slicing ability. Because the latter has higher power, its slicing ability is stronger.

2. What is the reason for the oil leakage of the slicer? What's the reason for the uneven cut surface?

If the slicer leaks oil, there may be a problem with the oil pipe or the oil tank in the machine. At this time, check the oil tank and oil pipe to find out the real cause. If the slice is not flat, it may be caused by too fast slice speed or damage to the sleeve bearing.

3. After the slicer is sliced, there are obvious knife marks or cut marks on the material. What are the specific reasons?

Reason 1: The hardness of the cut material is too high, so that the slicing operation cannot be performed smoothly. At this time, a suitable blade should be replaced.

Reason 2: The blade in the slicer is not installed in place, or it is loose. At this time, the blade should be checked. If there is looseness, it should be tightened in time. Or, if the equipment is not cooled enough, the cooling oil should be adjusted at this time to make the cooling force appropriate to avoid the problem.